New Computer

User avatar
Sput
Posts: 7547
Joined: Wed 20 Aug, 2003 19.57

Try a card in there first, they're meant to be off-centre because the pcb of any given card is at the edge of the bracket that attaches it to the case.
Knight knight
Neil Jones
Posts: 661
Joined: Thu 11 Sep, 2003 20.03
Location: West Midlands

Gavin Scott wrote:Although the motherboard fits where it should go, I noticed that the AGP and other slots don't seem to line up very well with the cutouts on the back of the frame. Is this normal? How would I resolve this (short of cutting the back panel somewhat)?
Some cases have a separate screw that allows you to remove the backing plate that you screw the motherboard to. You only have to take this out and then it doesn't take much action to dislodge the plate in any direction.

Assuming its a totally standard motherboard with the slots and things in the same place (and not something which a PC manufacturer has fiddled with) then there's no reason why the slots shouldn't line up if the backing plate's in right.

Of course, it could well be a case that's been cut in a shoddy fashion from the production plant.
James H
Posts: 1276
Joined: Tue 20 Jul, 2004 14.49
Location: In your endo

Would this get Tidus into trouble?

http://kjcomputers.serveftp.net/images/tsm/
Dr Lobster*
Posts: 2123
Joined: Sat 30 Aug, 2003 20.14

he has his own forums over at http://sillydog.org/forum/section_18.php

its quite a strange community, you have the djgm user (who you might remember only ever posted about mozilla and apple on here), tid, who is most probably somebody with mental illness and the maintainer of the forum, antony who seems to start 99% of the threads there.

i have actually just reported titus to (or jamie williams which is his real name) to shropshire trading standards.

he uses ntl broadband to host http://kjcomputers.serveftp.net/ which i'm going to report too, (or somebody else could if your feeling helpful). i've also got the address of the kjc corporation ltd which he has as a contact on his website, i have the contract details of the directors so i might give them a bell later.
User avatar
Gavin Scott
Admin
Posts: 6442
Joined: Fri 15 Aug, 2003 13.16
Location: Edinburgh
Contact:

Sorry chaps but Mr Tidus has taken it upon himself to report Metropol to the ISP for the use of his name in the past; and although an investigation proved we had not broken any rules, I would still prefer we don't give him the oxygen of publicity.

But feel free to report him to Companies House directly.
User avatar
Lorns
Posts: 3149
Joined: Thu 24 Mar, 2005 22.48
Location: A room with a view. 15 Hookey street, the Edge.
Contact:

Gavin Scott wrote:Sorry chaps but Mr Tidus has taken it upon himself to report Metropol to the ISP for the use of his name in the past; and although an investigation proved we had not broken any rules, I would still prefer we don't give him the oxygen of publicity.
Teehee!! What a knob!!!!
Mental anxiety, Mental breakdowns, Menstrual cramps, Menopause... Did you ever notice how all our problems begin with Men?
antony
Posts: 79
Joined: Sun 09 Apr, 2006 01.32
Location: Sydney, NEW South Wales, Australia
Contact:

Gavin Scott wrote:Sorry chaps but Mr Tidus has taken it upon himself to report Metropol to the ISP for the use of his name in the past; and although an investigation proved we had not broken any rules, I would still prefer we don't give him the oxygen of publicity.
His name is not copyright, he can't sue Metropol for someone using his name.
Antony from SillyDog701 | MacCentre701
AntBlog701, a very happy Mac user
User avatar
Pete
Posts: 7630
Joined: Fri 15 Aug, 2003 13.36
Location: Dundee

dare i suggest if Easily have already investigated his dribble, then they'll know he's a moron and shouldn't annoy martin again.
"He has to be larger than bacon"
antony
Posts: 79
Joined: Sun 09 Apr, 2006 01.32
Location: Sydney, NEW South Wales, Australia
Contact:

nodnirG kraM wrote:Defamation is different from copyright infringement.
Did Metropol 24/7 actually defame him?
Antony from SillyDog701 | MacCentre701
AntBlog701, a very happy Mac user
Dr Lobster*
Posts: 2123
Joined: Sat 30 Aug, 2003 20.14

antony wrote:
nodnirG kraM wrote:Defamation is different from copyright infringement.
Did Metropol 24/7 actually defame him?
no, he didn't like us talking about his company, kjc which doesn't actually exist. i dare say 'rikku' from your site also doesn't actually exist either and is in fact tidus (or jamie williams, his real name)

but instead of either disproving or providing reasonable explanations for the gaping inconsistencies in his story he cries foul, and when i tried to ask him questions about the legitimacy of the company (of which he had no explanation), djgm censored and deleted the posts (on your board), so i gave up and thought... if people are that stupid to believe his lies then let them.

i mean, you look at his website, there isn't really a 'business' there... no address of any shops, no address of anything, not even a working phone number, etc etc, the company name also doesn't exist in the companies house until the name was edited to fit a company in london (of which none of the directors are either tidus or 'rikku'. it's all made up. in the earlier threads he had addresses on this website, but when they were investigated they were different shops entirely and were removed.

unfortunately, mr tidus johnson and djgm have been playing you, and your fellow forum users as complete idiots and you have taken their word for it every step of the way.

i meant no trouble when i contacted you, i wanted to ensure people aren't ripped off by him.

it seems money isn't his driver, it appears he uses being 'ceo/director' to try and be popular or win respect on forums. i'm not sure why. all we tried to do on this forum was *prove* he was lying, he is, so he went off in a huff.
User avatar
Pete
Posts: 7630
Joined: Fri 15 Aug, 2003 13.36
Location: Dundee

I noticed DJGM has vanished since the whole tidus business started. Interestingly he had been one of the longest serving members on TVF/MP
"He has to be larger than bacon"
Please Respond